Each Package will include Decapper and 7 pins! that is 5 additional pins!
Want to see the decapper in action? Check out this YouTube Video by Dungeon Reloading (Like and Subscribe for more videos)
DESIGNED AND MANUFACTURED IN THE USA USING AMERICAN SOURCED MATERIALS AND TOOLS
High speed decapping isn’t just for pistol rounds anymore. Achieve faster decapping cycle times in bottle neck rifle cases with the FW Arms™ Auto-Case Centering Decapper. The FW Arms™ Auto-Case Centering Decapper uses a patent pending design that centers the case with the decapping pin to eliminate case wiggle after indexing on a progressive press. If you reload with an autodrive you want to have as little down time as possible, no more delays at the top stroke of your press. No more decapping pins ending up on the outside of the case neck. Maximize your speeds with the FW Arms™ Auto-Case Centering Decapper.
THE F.W. ARMS AUTO-CASE CENTERING DECAPPER IS THE BEST CHOICE NO MATTER HOW MUCH BRASS YOU PROCESS
Some reloaders will only decap a few hundred rounds per year, while some competitive shooters will decap tens of thousands of rounds per year, no matter the volume, you won’t find a better decapper. The FW Arms™ Auto-Case Centering Decapper not only increased productivity by allowing maximized case indexing, the decapping tip has been designed with the features that will benefit any reloader. FW Arms™ uses a specific steel alloy pin that has been heat treated, but we didn’t stop there. We’ve designed the tip to virtually eliminate all primer pull back, No more stopping your machine to clear a jammed primer from the shell plate.
NO MORE FEARING THE BERDAN PRIMED CASE
Berdan primed cases are the worst. Either spend the time to hand pick them out, or roll the dice and see how your current decapper handles them. The FW Arms™ Auto-Case Centering Decapper is made to be resistant from bending or breaking when hitting a berdan primed case. If you have an autodrive with a digital clutch, you can set the clutch low and have confidence when your press stops at a berdan, you won’t be surprised with a bent pin as well. The FW Arms™ pin isn’t invincible, but it is proving to be far superior than even the mightiest…
A GREAT ADDITION TO ANY PRESS
On single stage and turret presses the FW Arms™ Auto-Case Centering Decapper will handle most cases up to 300 Win Mag. In most progressive presses the FW Arms™ Auto-Case Centering Decapper design is compatible with cases up to 30-06 in size and/or a neck I.D. no less than .22, and will handle cases up to 45 cal in dia. Pretty much what is considered a standard size for your standard case collator.
SUPER 1050 USERS
TheFW Arms™ Auto-Case Centering Decapper greatly improves the reloading process on the most commonly processed cases such as but not limited to 9mm, 223/556, 308; however in Super 1050 presses, due to where indexing starts, cases longer than 308 are still engaged in the auto-center shuttle during indexing which can cause some issues. We are always designing and will have an option to allow for longer cases in the future so check back soon for new models to fit longer cases such as 3006 and 7mm Rem Mag.
Each die comes with our Golden Nut. Turned from solid steel hex stock, these nuts are still 1″ across the flats and measure .375″ thick. If you want some F.W. Arms Golden Nuts click here!